Skip to content

Building in the Lian Li LANCOOL II

  • by

Building in the Lian Li LANCOOL II case was a lot of fun! We chose an ASUS theme for this build.

If you’re looking for this PC let us know we can customize one for you!

When choosing water cooling components, you can’t go wrong with EKWB. We were able to waterblock an ASUS Tuf 3080 Ti on both front and back side to ensure that the vRAM chips are kept cool.

On this beauty, we chose the AMD Ryzen 9 5950x. We were able to fit a 360 and a 240 radiator inside and there is plenty of space for a nice clean loop.

Parts Used in this build:
AMD Ryzen 9 5950X 16-core, 32-Thread Unlocked Desktop Processor
ASUS TUF Gaming GeForce RTX 3080 Ti 12GB GDDR6X PCI Express 4.0 Video Card TUF-RTX3080TI-O12G-GAMING SN: M9YVKP00C6078RW
32GB (2 x 16GB) G.SKILL Trident Z 288-Pin RGB DDR4-3600 C16D Ram
Sabrent 2TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD Maximum Performance Solid State Drive R/W 4800/3600 MB/s (SB-RKTQ4-2TB)
EKWB EK-Loop Uni Pump Reservoir Mounting Bracket, 120mm
EKWB EK-Quantum Velocity CPU Water Block, AMD CPU, AMD CPU, Copper/Plexi
EKWB EK-Quantum Vector TUF RTX 3080/3090 Active GPU Backplate, D-RGB, Plexi
EKWB EK-Quantum Vector TUF RTX 3080/3090 GPU Water Block, D-RGB, Nickel/Plexi
EKWB EK-CoolStream Classic SE 360 Slim Radiator, Triple Fan, Black
EKWB EK-CoolStream SE 240 Radiator, Slim Dual, Black
EKWB EK-Quantum Kinetic TBE 300 D5 PWM Pump-Reservoir Combo, D-RGB, Plexi
Lian Li UNI Fans SL120
FormulaMod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P with Combs for PSU to Motherboard/GPU Fm-NCK3 (White Black Sky Blue)
Barrow G1/4″ Male to Female Extender Fitting, 30mm, White
3 x Barrow G1/4″ to 14mm Multi-Link Fitting, 90 Degree Rotary, White
12 x Barrow G1/4″ Compression Fitting For 14mm OD Rigid Tube Hard Tube
2 Barrow G1/4″ Male to Female Extender Fitting, 45 Degree Rotary, White
PrimoChill Opaque Computer WaterCooling Fluid – Pre-Mix (32oz) – Sky Blue SX
Digital Water Cooling Flow Meter Temperature Display Liquid Cooling Thermometer OLED Screen for PC Water Cooling System Flow Rate
EVGA SuperNOVA 850 Ga, 80 Plus Gold 850W, Fully Modular

First was fitting the pump and it sits well inside!
opening up the boxes is fun
Fitted the MB, GPU and some cables. Installed the CPU water block.
Top view of that GPU.
view from the bottom
Figuring out where to integrate these to flow indicators
That looks good
Added some pipes to the top rad
We were able to install the 360 rad in the front and is almost hidden. We used the other flow inticator as a drain.
Filled it with some Sky Blue from Primochill